• Model NO.：JYSH
• Material Shape：Round Wire
• Range of Application：LSOH
• Certification：ISO9001, CE, UL
• Brand：Senphus
• Power：16or17-976
• Length：DIY
• Transport Package：Caton-Woodcase-Pallet-Colourbox-White
• Specification：1-48M
• Trademark：SENPHUS
• Origin：China
• HS Code：85168310
• Production Capacity：8000,Mouth

calibre
15mm
22mm
28mm
35mm
42mm
48mm
60mm
76mm
Without pipe insulation
-20°C.
-13°C.
-10°C.
-7°C.
-5°C.
-4°C.
-3°C.
-2°C.
With 13mm pipe insulation
-45°C.
-45°C.
-40°C.
-40°C.
-35°C.
-30°C.
-25°C.
-20°C. 

Installation: 

1. first unwind the heating cable. The cable must never be connected to the power line when it is wound up.
2. if the cable is too inflexible because of low temperatures, unwind it and put it for some minutes into the plug.
3. afterwards you can pass the cable.
4. the area around the pipe where you want to connect it with the cable must be accessibly and non-attached.
5. the heating cable can not be passed behind walls
6. put the thermostat with the round black contact area tightly on the coolest point of the pipe and fix it with insulating tape.
7. finally put the whole cable on the pipe and fasten it every 30~60cm with insulating tape.
8. attention: the cable must be fastening straight on the pipe
9. now you can check if your cable works.
10. afterwards insulate the water pipe and the heating cable with mineral rock wool or foam. Attention: never use more than 13mm of this material to insulate.
11. in general the heating cable must be protected against mechanical damage or biting.
12. the heating cable can not be put into liquids.
13. finally plug the cable into a 230V main plug.