Cable & Wire

Home > Product > Other Wire & Cable

Single Conductor Brick Stone Cement ceramic Marble Floor Electrical Warming Cable with Ce Eac

Wuhu Jiahong New Material Co., Ltd.
  • Cable Construction：Single Conductor
  • Rated Voltage：230V
  • Output：10,11,11.5,20W,M
  • Bending Radius：25mm
  • Cable Diameter：2.6mm
  • Conductor Insulation：Fluoropolymer

Base Info

  • Model NO.：minicables
  • Outer Insulation：PVC
  • Max. Ambient Temp：85ºF(30ºC)
  • Min. Installation Temp：40ºF(5ºC)
  • Cold Lead：Two 2.5m Length Each
  • Transport Package：Innner Carton Master Carton
  • Trademark：jiahong
  • Origin：Anhui Wuhu
  • Production Capacity：17000PCS Per Day

Description

ohmsCatalog NumberMiniCableS/20-1507.5 1500.7 352.7 MiniCableS/20-21510.8 2150.9 246.0 MiniCableS/20-32016.0 3201.4 165.3 MiniCableS/20-43021.5 4301.9 123.0 MiniCableS/20-53026.5 5302.3 99.8 MiniCableS/20-56528.3 5652.5 93.6 MiniCableS/20-64032.0 6402.8 82.7 MiniCableS/20-74037.0 7403.2 71.5 MiniCableS/20-85042.5 8503.7 62.2 MiniCableS/20-106053.0 10604.6 49.9 MiniCableS/20-128064.0 12805.6 41.3 MiniCableS/20-150075.0 15006.5 35.3 MiniCableS/20-170085.0 17007.4 31.1 MiniCableS/20-2120106.0 21209.2 25.0 MiniCableS/20-2250112.5 22509.8 23.5 MiniCableS/20-2550127.5 255011.1 20.7 MiniCableS/20-2800140.0 280012.2 18.9 The warm up time of an electric underfloor heating system will be dictated by the insulation used beneath it and the output of the system. In general, the better insulated the sub-floor the faster the system will warm up, with Underfloor Insulation boards?facilitating a very speedy warm up time of as little as 15 minutes, and un-insulated concrete floors causing the slowest warm up time. Using a?200W system?beneath ceramic/stone tiles provides a faster warm up time than 150W system.

 

2. Can I turn my heating on the day it is fitted? 

If you have installed your heating beneath tile adhesive, levelling compound or a screed you must allow this to dry out before turning on your system for the first time. If the system is turned on too early it will force the moisture out of the covering which may lead it to crack. We would recommend speaking to the manufacturer of your flexible tile adhesive, grout or screed to confirm the drying time required.

 

3. Does each room require its own thermostat?

We would recommend that each room has its own heating system controlled by its own thermostat. This will allow for simpler and more accurate temperature control of each room and will avoid heating rooms which do not require it.